ANGI srl manufacture and trade of electric insulating materials ANGI srl manufacture and trade of electric insulating materials
ANGI srl


  products varnishes

    AIR VARNISHES

    A 123R

      The varnish A123R is made with special resins with quick release. It is suitable for all electrical equipments in which short drying up is required. It is compatible with all kinds of enamelled wire and it has a very good resistance. It can be also supplied in the colours brown, orange and in tropicalized version.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Transparent yellow
      Density a 25°C ASTMD 115/72 0,910 - 0,930
      Viscosity 25 °C (FORD 4 Cup) ASTMD 1200/70 24" - 30"
      Dry residual 135°C ISO 3251 36% - 38%
      Drying to the touch 25 °C ASTMD 115 20' - 30'
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 6.300 V/0,1mm


    A124
      The varnish A124 is made with epoxy resins and modified esters. It is suitable when a strong protection from chemical agents, from rubbings and to seal and to protect the panels of printed circuits is required. It is compatible with all kinds of enamelled wire and it has an excellent water and saline resistance.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Transparent yellow
      Density a 25°C ASTMD 115/72 0,950 - 0,970
      Viscosity 25 °C (FORD 4 Cup) ASTMD 1200/70 55" - 65"
      Dry residual 135°C ISO 3251 48% - 52%
      Drying to the touch 25 °C ASTMD 115 2h - 3h
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 6.200 V/0,1mm


    A125
      The varnish A125 is made with modified alkyd resins with a quick release of solvent. It has been specifically designed for all the electrical equipments in which a very short drying up is required. It is suitable for windings that have to work in F insulation class and it is compatible with all kinds of enamelled wire. It can be also supplied in the colour brown, orange and in tropicalized version.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Transparent yellow
      Density a 25°C ASTMD 115/72 0,940 - 0,960
      Viscosity 25 °C (FORD 4 Cup) ASTMD 1200/70 14" - 16"
      Dry residual 135°C ISO 3251 35% - 39%
      Drying to the touch 25 °C ASTMD 115 20' - 30'
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 6.200 V/0,1mm


    A128
      The varnish A 128 is made with special alkyd-urethane resins with a quick release of solvent. It has been specifically designed for all the electrical equipments in which a very short drying up is required. It is suitable for windings that have to work in F and B insulation class. It is compatible with all kinds of enamelled wire and it has a high water and mineral oils resistance. It can be also supplied in the colour brown, orange and tropicalized version.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Transparent brown yellow
      Density a 25°C ASTMD 115/72 0,940 - 0,960
      Viscosity 25 °C (FORD 4 Cup) ASTMD 1200/70 14" - 20"
      Dry residual 135°C ISO 3251 35% - 39%
      Drying to the touch 25 °C ASTMD 115 50' - 100'
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 6.300 V/0,1mm


    A182
      The varnish A182 is made with superphenolic resins modified with vegetable oils with quick drying up. It is suitable for the finishing of electronic equipments in which a quick drying up, a good penetration and a good acids and humidity resistance is required. It is compatible with all kinds of enamelled wire.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Transparent brown yellow
      Density a 25°C ASTMD 115/72 0,860 - 0,880
      Viscosity 25 °C (FORD 4 Cup) ASTMD 1200/70 22" - 30"
      Dry residual 135°C ISO 3251 48% - 52%
      Drying to the touch 25 °C ASTMD 115 1h - 3h
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 6.800 V/0,1mm


    A213
      The varnish A 213 is an air drying varnish made with celluloid. Once it has been dried, the product forms a thick film with excellent resistance to heat, to oil and to general solvents used in impregnation dielectric varnishes. For these characteristics it is used as masking varnish to protect the metallic parts that have not to come into contact with others varnishes and once the cycle has been terminated it can be easy removed from the part to protect.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - Blue
      Density a 25°C ASTMD 115/72 0,845 - 0,860
      Viscosity 25 °C ASTMD 2393/80 800 - 1.300 mPa.s
      Dry residual 135°C ISO 3251 24% - 28%
      Corrosion on copper IEC 464 - 2.8 Absent
      Drying 25 °C IEC 464 - 2.4 2' - 5'


    VE 60514
      The varnish VE 60514 is an epoxy insulating varnish of two components with very good bather and penetration. After the polimerization, the varnish forms a strong film with high adhesion to metallic stands. The electric, mechanical and thermic characteristics of the film are very good as well as the atmospheric agent resistance especially to the humidity. The varnish can be charged with mineral charges and pigments without losing its characteristics. The varnish can be used for application in F insulation class.

      C H A R A C T E R I S T I C S
      STANDARDS VALUE
      Colour - (A) amber (B) transparent yellow
      Density a 25°C ASTMD 115/70 (A) 1,040-1,050 (B) 0,960-0,990
      Viscosity 25 °C ASTMD 1200/70 (A) 120"-160" (B)350-450 mPa.s
      Dry residual 135°C ISO 3251 (A) 60%-62% (B) 52%-56%
      Drying to the touch a 25 °C ASTMD 115 5h - 7h
      Corrosion on copper IEC 464 - 2.8 Absent
      Dielectric strength IEC 464 - 2.16 20 KV/mm


    Air varnishes here shortly described represent a minimum part of our production.

    For further technical information and/or specific requests you can contact us to the following address:
    angi@angisrl.com


    Notes:
    The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory.
    Because of the various and particular applications, these information are merely indicative without our responsibility.

 




ANGI srl manufacture and trade of electric insulating materials
angi@angisrl.com
Administration office
20127 Milano
viale Brianza, 8
tel. +39 02.26144247
fax +39 02.2893746		Commercial offices and warehouse
14018 Villafranca d'Asti
loc. Case Bruciate, 37
tel. +39 0141.943825
fax +39 0141.943170