ANGI srl  manufacture and trade of electric insulating materials ANGI srl  manufacture and trade of electric insulating materials
ANGI srl


  products flexibile insulation tubes


    AT 7

      The insulation tube AT7 is made with braiding in glass fibre at 100% of E type (electrotechnical use) and with a modified polyester varnish. It is flexible and at the same time it is very resistant to high temperatures. It is used in the insulation and wirings of electric machines, motors, transformers and in all the application in which B insulation class is required. The manufactured diameters are from 0,8 mm to 12 mm. It is supplied in 50-100 Mt rolls in yellow standard colour, but on request also in others colour.

      C H A R A C T E R I S T I C S
      VALUE
      Standard colour Yellow
      Manufactured diameters 0,8 mm -12 mm
      Tolerance on diameters ± 0,12 mm
      Dielectric strength 2.000 -2.500 Volt
      Insulation class B (130 °C)


    AT 9
      The insulation tube AT9 is made with braiding in glass fibre at 100% of E type (electrotechnical use) and with silicone elastomer. It is flexible and at the same time it is very resistant to high temperatures. It is used in the insulation and wirings of electric machines, motors, transformers and in all the application in which H insulation class is required. The manufactured diameters are from 0,8 mm to 12 mm. It is supplied in 50-100 Mt rolls in brick red standard colour.

      C H A R A C T E R I S T I C S
      VALUE
      Standard colour Brick red
      Manufactured diameters 0,8 mm - 16 mm
      Tolerance on diameters ± 0,12 mm
      Dielectric strength 1.000 - 4.000 Volt
      Insulation class H (180 °C)




For further technical information and/or specific requests you can contact us to the following address:
angi@angisrl.com



Notes:
The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory.
Because of the various and particular applications, these information are merely indicative without our responsibility.

 




ANGI srl  manufacture and trade of electric insulating materials
angi@angisrl.com
Administration office
20127 Milano
viale Brianza, 8
tel. +39 02.26144247
fax +39 02.2893746
Commercial offices and warehouse
14018 Villafranca d'Asti
loc. Case Bruciate, 37
tel. +39 0141.943825
fax +39 0141.943170