ANGI srl manufacture and trade of electric insulating materials

PREIMPREGNATED CLOTHES

PREIMPREGNATED CLOTHES

APREG DMD

The APREG DMD is a pre-preg obtained by laminating non-woven fabric on both surfaces of a polyester film. The laminate is then imbued in the epoxy resin, reactive in B stage. It has been used to manufacture transformer and electric machines, namely to isolate and stiffen all conductors. APREG DMD is dry, but contains a reactive epoxy resin introduced in the wiring together with the insulating laminate. When the epoxy resin hardens, electrical conductors are isolated by this compound and protected against humidity. It is supplied in standard height of 910 mm, but on request it can be supplied in different heights till to 1350 mm.

C H A R A C T E R I S T S
	VALUE
Colour	Red RAL 3009 - colourless on request
Thickness	0,18 ± 0,03 mm
Weight	224 gr/m2 ± 12%
Polymerisation temperature	140 °C - 160 °C
Polymerisation time	4h - 6h
Dielectric resistance	6 KV
Insulation class	F (155 °C)

APREG F

The APREG F is stage B compound made with impregnated glass cloth and covered with a F class epoxy resin. It has been designed for the coils insulation in dry and encapsulated transformers. It is supplied dry, but during the cooking phase, the resin fluidifies and it enters in the interstices obtaining very good resistance to electric insulation and high short circuit resistance. It is available in thickness 0,15 mm (APREG 15H) or in thickness 0,20 mm (APREG 20H) in standard heights of 1.100-1.200 mm, but on request it can be supplied in heights till to 1.350 mm.

C H A R A C T E R I S T S
	VALUE
Cloth type	Cloth
Thickness	0,15mm (APREG 15H) 0.20 mm (APREG 20H)
Weight	107 gr/m2 (APREG 15H) 210 gr/m2 (APREG 20H)
Resin content	47% -53% (APREG 15H) 38%-42% (APREG 20H)
Polymerisation temperature	160 °C
Polymerisation time	1h
Insulation class	F (155 °C)

APREG FR

The APREG FR is a pre-preg made with impregnated glass cloth and covered with a special F class auto-extinguishing epoxy resin. It has been designed for the coils insulation in dry and encapsulated transformers. The advantage of this products is that during the cooking phase the resin fluidifies and it adheres to the wires giving to winding a very good insulation and high mechanical resistance. It is available in thickness 0,15 mm (APREG 15H) or in thickness 0,20 mm (APREG 20H) in standard heights of 1.100-1.200 mm, but on customer's request it can be supplied in heights till to 1350 mm.

C H A R A C T E R I S T S
	VALUE
Cloth type	Cloth
Thickness	0,15mm (APREG 15H) 0.20 mm (APREG 20H)
Weight	107 gr/m2 (APREG 15H) 210 gr/m2 (APREG 20H)
Resin content	47% -53% (APREG 15H) 38%-42% (APREG 20H)
Polymerisation temperature	160 °C
Polymerisation time	1h
Insulation class	F (155 °C)

APREG H

The APREG H is a stage B, H class compound made with impregnated glass cloth and covered with a special epoxy resin. It has been designed for coils insulation in dry and encapsulated transformers. It is supplied dry, but during the cooking phase, the resin fluidifies and it enters in the interstices obtaining a very good resistance to electric insulation and high short circuit resistance. It is available in thickness 0,15mm (APREG 15H) or in thickness 0,20 mm (APREG 20H) in standard heights of 1.100-1.200 mm, but on request it can be supplied in heights till to 1350 mm.

C H A R A C T E R I S T S
	VALUE
Cloth type	Cloth
Thickness	0,15mm (APREG 15H) 0.20 mm (APREG 20H)
Weight	107 gr/m2 (APREG 15H) 210 gr/m2 (APREG 20H)
Resin content	47% -53% (APREG 15H) 38%-42% (APREG 20H)
Polymerisation temperature	160 °C
Polymerisation time	1h
Insulation class	F (180 °C)

For further technical information and/or specific requests you can contact us to the following address:
angi@angisrl.com

Notes:
The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory.
Because of the various and particular applications, these information are merely indicative without our responsibility.