| |
products  resins
POLYESTER RESINS
RP 342 The resin RP 342 is an unsaturated polyester resin formulated with special components in order to give a high self-extinguishing power. The resin is reactive at 100%. It is particularly suitable where heat-resisting security encapsulations and not propagating the flame are requested. It can be charged without loosing its peculiarity. It is compatible with all kinds of enamelled wire and it is particularly suitable for those equipments that have to resist to F insulation class. The resin has a very good finish aspect and has a good high temperatures resistance.
C H A R A C T E R I S T I C S
|
STANDARDS |
VALUE |
| Colour |
- |
Pale yellow |
| Density 25°C |
ASTMD 1475/60 |
1,100 - 1,120 |
| Viscosity 25 °C |
ASTMD 2393/80 |
900 - 1.150 mPa.s |
| Water absorption |
ASTMD 3418 |
0,2% |
| Dielectric resistance |
ASTMD 149/61 |
1.800 V/0,1 mm |
| Volume resistivity |
ASTMD 257/61 |
1012 Ohm |
RP 370M The resin RP 370M is made with modified unsaturated polyester resins. It has been specifically designed for the drop by drop impregnation of stators and rotors. The resin is reactive at 100% and it is compatible with all kinds of enamelled wire. It has a very good penetration also in the more compact equipments, a good high temperature resistance and it is suitable for equipments that have to work in F and H insulation class.
C H A R A C T E R I S T I C S
|
STANDARDS |
VALUE |
| Colour |
- |
Amber |
| Density 25°C |
ASTMD 1475/60 |
1,070 - 1,080 |
| Viscosity 25 °C |
ASTMD 1200/70 |
35' - 45' |
| Water absorption |
ASTMD 3418 |
0,3% |
| Dielectric resistance |
ASTMD 149/61 |
55 KV/mm |
| Volume resistivity |
ASTMD 257/61 |
1014 Ohm |
RP 395 The resin RP 395 is made with transparent polyester resins diluted in a reactive solvent, the whole stabilized and added of special plasticizers to decrease the retirement and to grant a easy use. The resin is reactive at 100% and it is compatible with all kinds of enamelled wire. It is particularly suitable for the casting, the filling and encapsulations of electrical equipments. The resin has a very good penetration also in the more complex equipments, a good high temperature resistance and it is suitable for equipments that have to work in F and H insulation class.
C H A R A C T E R I S T I C S
|
STANDARDS |
VALUE |
| Colour |
- |
Transparent colourless |
| Density 25°C |
ASTMD 1475/60 |
1,055 - 1,065 |
| Viscosity 25 °C
|
ASTMD 1200/70 |
45' - 55' |
| Water absorption
|
ASTMD 3418 |
0,12% |
| Dielectric resistance |
ASTMD 149/61 |
21 KV/mm |
| Volume resistivity
|
ASTMD 257/61 |
3,9x1013 Ohm |
The epoxy resins here shortly described represent a minimum part of our production.
For further technical information and/or specific requests you can contact us to the following address:
angi@angisrl.com
| |
angi@angisrl.com
Uffici amministrativi
20127 Milano
viale Brianza, 8
telefono 02.26144247
fax 02.2893746 | | Uffici commerciali e stabilimento
14018 Villafranca d'Asti
loc. Case Bruciate, 37
telefono 0141.943825
fax 0141.943170 |
|
