| |
products  plates
POLYESTER GLASS PLATES
ANGIPOL TP The Angipol TP is a composite obtained form unsaturated polyester resin reinforced from a Mat of continuous filament of glass.
The product has very good tracking resistance and self-extinguishing and good electrical and mechanical properties. It is particularly suitable for use in unfavourable ambient.
L'Angipol TP has been certified as regards fire reaction, tests on issued gas, the toxicity index determination and the fumes density.
L'Angipol TP can be supplied in plates of 1050x1270 mm or in finished parts.
C H A R A C T E R I S T S
|
VALUE |
| Colour |
Red - White |
| Density |
1,8-1,9 gr/cm3 |
| Water absorption |
45 mg |
| Flexural strength layers to 23°C |
135 MPa |
| Compressive strength layers |
220 MPa |
| Impact strength (Charpy) // layers |
67 MPa |
| Tensile strength |
75 MPa |
| Dielectric strength layers to 23°C, oil |
30 kv/mm |
| Dielectric constant to 50 Hz |
5 |
| CTI (Comparative Tracking Index) |
600 |
ANGIPOL RM The Angipol RM is a stratified made by a polyester resin reinforced with glass + glass Mat.
It features high mechanical and electrical properties, extinguish, anti-arc, anti-trace, without halogens.
C H A R A C T E R I S T I C S
|
VALUE |
| Colour |
White |
| Density |
1,85 gr/cm3 |
| Water absorption |
25 mg |
| Flexural strength to 23°C |
345 MPa |
| Compressive strength layers |
220 MPa |
| Impact strength / 23°C |
240 KJ/m² |
| Tensile strength / 23°C |
250 MPa |
| Compressive strength |
240 MPa |
| Dielectric constant |
5 |
| Tracking Index |
600 CTI |
| Arc resistance |
180 °C sec |
VETROPOLIESTERE M The polyester glass tape, type M, thickness 1 mm, is a composite obtained from unsaturated polyester resin reinforced from a Mat of continuous filament of glass.
It is particularly suitable for the manufacture of winding stands for dry transformer and for insulation cores transformer.
It is supplied in plates of dimension 1000x2000 mm.
C H A R A C T E R I S T I C S
|
VALUE |
| Mass |
1,42 gr/cm³ |
| Tensile strength |
123,6 Mpa |
| Compressive strength |
129,4 Mpa |
| Flexural strength |
120-140 Mpa |
| Dielectric strength |
10-12 KV/mm |
| Dielectric constant |
4 |
| Water absorption |
0,4 % |
| Maximum temperature |
140 °C |
Notes:
The information given in this data sheet are the results of careful researches and several tests carried out in our laboratory.
Because of the various and particular applications, these information are merely indicative without our responsibility.
| |
angi@angisrl.com
Administration office
20127 Milano
viale Brianza, 8
tel. +39 02.26144247
fax +39 02.2893746 | | Commercial offices and warehouse
14018 Villafranca d'Asti
loc. Case Bruciate, 37
tel. +39 0141.943825
fax +39 0141.943170 |
|
